MyException - 我的异常网
当前位置:我的异常网» 综合 » motion的移栽和使用

motion的移栽和使用  网友分享于:2013-04-10  浏览:6次

系统: Ubuntu 12.10
linux: 2.6.32

对于PC版本的直接apt-get install motion就可以的具体的使用方法参见这里。
2.配置命令:./configure  --prefix=${PWD}/_install  --host=arm-linux --without-ffmpeg

3.接下来就是make  和 make install了。

4.make install后会在_install/bin/目录下产生motion可执行文件,拷贝到开发板上/root/motion目录下,并在同目录中建motion.conf内容如下:
# Minimal motion example config file provided by the
# Debian motion package - for basic webcam operation.
# You most certainly want to investigate
# /usr/share/doc/motion/examples/motion-dist.conf.gz
# for further configuration options. Also, refer to the
# motion man page and /usr/share/doc/motion/motion_guide.html
# for detailed information on configuration options.


daemon off

quiet on

locate on


# You may very well need to change this (check with 'dmesg'
# after plugging in your webcam).

videodevice /dev/video0


# Image size in pixels (valid range is camera dependent).

width 320

height 240


framerate 25

quality 85

auto_brightness off


# General threshold level and noise threshold
# level (for distinguishing between noise and motion).

threshold_tune off

threshold 4500

noise_level 64

# Initial brightness, contrast, hue (NTSC), and saturation.
# 0 = disabled (valid range 0-255).

brightness 0

contrast 0

saturation 0

hue 0

# Encode movies in real-time (install ffmpeg before enabling).

ffmpeg_cap_new on

# Codec to be used by ffmpeg for the video compression.
# Supported formats: mpeg4, msmpeg4.

ffmpeg_video_codec msmpeg4


# Target base directory for pictures and films (you may need
# to change this (or change its permissions) depending on
# which system user runs motion).

target_dir /root/motion/snapshots

# Define a port number (e.g. 8000) to enable the mini-http server.

# 0 = disabled.

webcam_port 8081

# Set to 'off' to allow anybody (not just localhost) to view the
# webcam via the mini-http server (http://hostname:port).

webcam_localhost off

snapshot_interval 1

snapshot_filename snapshot

webcam_quality 50

webcam_maxrate 8

#on_event_start /root/motion/on_motion_detected

#on_event_end /root/motion/on_motion_end

gap 10

5.运行./motion -c motion.conf



软件开发程序错误异常ExceptionCopyright © 2009-2015 MyException 版权所有